IRON SERVICE

Iron Service was created in 1995 as sheets cutting service centre, and became part of Eusider Group in 2010. Now Iron Service is dedicated to coils pickling and coils flattening.
Its strategic position near Ravenna port and motorway junctions and its plant of warehousing and service emphasize its role of fast and efficient partner in logistics.

IRON SERVICE GENERAL SERVICES

COILS PICKLING LINE

Iron Service can supply the following additional services:
– Coils covered warehousing with over 2000m² of raw material stock
– Outdoor temporary stock area with rail overhead crane
– Finished product stock area (sheets and pickled coils)
– Shuttle service from other port terminals
– Free transport delivery of all finished products

COILS PICKLING SERVICE

– Quality of pickled surface
– Gloss unity for cleaning grade > 80
– Maximum surface chloride residue: max 4 mg/m²
– Automatic thickness /width recording

PROTECTION AND PACKING TYPOLOGY

Every coils is packed with:
– At least three circumferential and radial staps
– Three identification tags of finished product applied on internal coil and on the outside coil
– Thickness/width graphic

COILS PICKLING

Iron service’s push pull pickling line is designed to treat the following coils typologies in low carbon steel (until S420MC) and high carbon steel (until C67):

» Minimum workable thickness 1.50mm, maximum workable thickness 8mm
» Minimum width 700mm, maximum width 1500mm
» Minimum weight 8 ton. Maximum weight 30 ton
» ID from 520mm to 840mm
» OD maximum 2010mm

PICKLING LINE DESCRIPTION
The line is divided in the following sections:

1. Unrolling section (cutting, head preparation, straightening, flakes remover)
2. Sheets conditioning
3. Hydrocloric acid pickling section
4. Purified water washing section
5. Finishing section (drying, automatic thickness /width recording, ispection, oil)
6. Rolling and packing section

LAC = HOT ROLLED COIL
LAF = COLD ROLLED COIL
Z = GALVANISED COIL
DEC = PICKLED

SHEETS FLATTENING LINE

The sheets service centre is composed of two flattening lines with the following characteristics:

» Flattening machine 2000x15mm (minimum thickness 3,0mm) LAC, DEC
» Flattening machine 2000×6,0mm (minimum thickness 1,0mm) LAC, LAF, Z, DEC

CONTACTS

For any information please contact us at the following address:

IRON SERVICE SRL
Via Classicana, 45
48122 Ravenna (RA)
Tel: + 39 0544 43 64 37
Fax: + 39 0544 43 68 82
info@ironservice.it